Canon imagePROGRAF iPF6450 User Manual Page 146
- Page / 159
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Cause Corrective Action
(See "Paper that can be used in Color Calibration.") →User's Guide
(See "Color Checks Using the Spectrophotometer Unit (option).") →User's Guide
Set Set Exec. Guide to Off on
the Control Panel menu.
(See "Menu Structure.")
→P.66
Before borderless printing, move the blue platen switch.
Before borderless printing, move the blue platen switch.
Cause Corrective Action
The blue Switch on the platen was set to the side opposite ●
when a borderless print job was received.
Before borderless printing, set the blue Switch on the platen to the ● side.
(See "Setting the Blue Switch on the Platen.") →P.118
Blue platen switch is dirty.
Blue platen switch is dirty.
Cause Corrective Action
The blue Switch on the platen is dirty. Open the Top Cover and clean the blue Switch on the platen.
(See "Cleaning Inside the Top Cover.") →P.51
Move the blue platen switch No.xx to the right. (xx represents a number)
Move the blue platen switch No.xx to the right. (xx represents a number)
Cause Corrective Action
The printer has detected that the blue Switch on the platen needed in
maintenance during printing is set away from the ● mark.
Set blue platen Switch of the indicated number toward the ● side.
(See "Setting the Blue Switch on the Platen.") →P.118
Cannot adjust paper feed.
Cannot adjust paper feed.
Cause Corrective Action
The Printhead nozzles are clogged. Execute Adj. Quality again, as follows.
1.
Press the OK button to clear the error.
2.
Print a test pattern to check the nozzles.
(See "Checking for Nozzle Clogging.") →User's Guide
3.
Clean the Printhead if the nozzles are clogged.
(See "Cleaning the Printhead.") →P.53
4.
Execute Adj. Quality again.
(See "Automatic Banding Adjustment.") →P.100
Highly transparent film is loaded that cannot be used
for automatic feed amount adjustment.
Press the OK button to clear the error, and then adjust the feed amount manually.
(See "Manual Banding Adjustment.") →User's Guide
Check printed document.
Check printed document.
Cause Corrective Action
The Printhead nozzles are becoming clogged. If printing is faint, clean the Printhead.
(See "Cleaning the Printhead.") →P.53
Spectrophotometer Unit not connected.
Spectrophotometer Unit not connected.
Cause Corrective Action
The Spectrophotometer Unit is not installed correctly. Turn off the power and reinstall the Spectrophotometer Unit.
Spectrophotometer Sensor not mounted.
Spectrophotometer Sensor not mounted.
Cause Corrective Action
The Spectrophotometer Sensor to be loaded
into the Spectrophotometer Carriage is not in-
stalled correctly.
Turn off the power, and reinstall by pushing the two connectors all the way into the Spec-
trophotometer Sensor.
(See "Replacing the Spectrophotometer Sensor of the Spectrophotometer Unit (option).")
→User's Guide
Before borderless printing, move the blue platen switch.
iPF6450
Basic Guide
Error Message Messages regarding printing or adjustment
146
- Basic Guide 1
- Safety Precautions 2
- In an Emergency 3
- Cleaning the Printer 3
- Pacemakers 3
- Moving the Printer 3
- FCC Regulations (U.S.A) 4
- For CA, USA Only 5
- Trademarks 5
- Copyright 5
- Legal Notice 5
- Manuals for this printer 6
- About This User Manual 7
- Handling Paper 9
- Handling Paper Handling rolls 11
- →User's Guide (HTML) 12
- Manually.") →P.16 13
- Handling sheets 18
- Consumables and Maintenance 31
- Confirm the message 32
- Remove the Ink Tanks 33
- Installing Ink Tanks 35
- Replacing Ink Tanks 37
- Printheads 38
- Replace the Printhead 40
- Replacing the Printhead 41
- Maintenance Cartridge 45
- Cleaning the Printhead 53
- Cleaning the Paper presser 59
- Printer Parts 61
- Menu Operations 62
- Accessing menus 63
- Specifying menu items 64
- Specifying numerical values 64
- Executing menu commands 65
- Menu Structure 66
- Ink Menu 67
- Job Menu 67
- Set./Adj. Menu 68
- Printer parts 72
- Top Cover (Inside) 73
- Paper Feed Slots 74
- Carriage 75
- Ink Tank Cover (Inside) 76
- • Do not block these vents 77
- Printer Relocation 78
- Remove the Ink Tank 79
- Pack the printer 80
- Reinstalling the Printer 82
- Install the printer 83
- Software Installation 86
- Installing the Software 88
- 2. Access the Main pane 91
- Borderless Printing 93
- Enlarged/Reduced Printing 95
- Starting from Adobe Photoshop 96
- Adjusting the Printhead 97
- Adjusting the feed amount 99
- Automatic Banding Adjustment 101
- Troubleshooting 102
- Clearing Jammed Roll Paper 103
- (See "Clearing 105
- Important 107
- (Paper Feed Slot).") 108
- →User's Guide 110
- Printing does not start 111
- Cause Corrective Action 112
- Printing is faint 113
- Number Dimensions Paper Size 120
- Close the Top Cover 121
- Cannot print over a network 125
- Installation problems 127
- Other problems 129
- Ink level detection 130
- Releasing ink level detection 130
- Ink Level Detection 131
- Error Message 133
- Messages regarding ink 142
- Paper Reference Guide .) 144
- Messages regarding printheads 149
- Other Messages 154
- Error Message Other Messages 155
- Error Messages 156
- Error Message Error Messages 157
Related products and manuals for Printers Canon imagePROGRAF iPF6450
Printers Canon imagePROGRAF iPF650 User Manual
(878 pages)
(878 pages)
Printers Canon PIXMA PRO-1 User Manual
(34 pages)
(34 pages)
Printers Canon imagePROGRAF iPF815 User Manual
(960 pages)
(960 pages)
Printers Canon imagePROGRAF iPF6400S User Manual
(164 pages)
(164 pages)
Printers Canon PIXMA iP2702 User Manual
(24 pages)
(24 pages)
Printers Canon imagePROGRAF iPF6400 User Manual
(142 pages)
(142 pages)
Printers Canon PIXMA PRO-1 User Manual
(34 pages)
(34 pages)
Printers Canon imagePROGRAF iPF765 User Manual
(132 pages)
(132 pages)
© 2020, manymanuals.com. All rights reserved. | 0.507 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals