Canon VB-H630D Owner's Manual download pdf (Page 64)

[Maximum Number of Loops]

If [Loop] is set under [File Naming], enter the

maximum number of loops in the range of 0 to 9999.

[User Setting]

Images are uploaded according to the file naming

method specified in [Subdirectory Name to Create]

and [File Name to Create].

[Subdirectory Name to Create], [File Name to

Create]

If file naming is set to [User Setting], enter the

subdirectory name to be created as well as the

name of the created file (using up to 127

characters). Parameters can be specified in the

entry with the “%” character (p. 156).

(7) [FTP Upload Test]

Clicking [Exec] initiates an upload test based on the

settings currently entered. Only one JPEG image is

uploaded. It is not necessary to click [Apply].

After entering a password, first click [Exec], then

[Apply] the password.

E-mail Notification

(1) [Notification]

Select [Text Only] or [Text with Image] as the content

of notification. If [Upload] is set to [Upload Disabled],

[Text with Image] will not be available.

(2) [Mail Server Name]

Enter the host name or IP address of the SMTP server

(using up to 63 characters).

(3) [Mail Server Port]

Enter the port number of the SMTP server (factory

default setting is [25]).

(4) [Sender (From)]

Set the e-mail address of the sender (using up to 63

characters).

(5) [Recipient (To)]

Set the e-mail address of the recipient (using up to 63

characters).

(6) [Authentication]

Select [None], [POP before SMTP] or [SMTP-AUTH]

for the e-mail authentication method.

Set an appropriate method according to the

authentication method used by the SMTP server to

send to.

[User Name], [Password], [POP Server]

If [POP before SMTP] is selected as the e-mail

authentication mode, enter the user name and

password as well as the host name or IP address of

the POP server required for authentication.

[User Name], [Password]

If [SMTP-AUTH] is selected as the e-mail

authentication method, enter the user name and

password required for authentication.

(7) [Subject]

Enter the subject of the e-mail to be sent using up to

31 ASCII characters.

(8) [Message Body]

Enter the message (text) of the e-mail to be sent using

up to 255 ASCII characters. Parameters can be

specified with the “%” character (p. 156).

(9) [E-mail Notification Test]

Clicking [Exec] initiates an e-mail notification test

based on the settings currently entered. It is not

necessary to click [Apply].

After entering a password, first click [Exec], then

[Apply] the password.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 185 186

Comments to this Manuals

No comments

Canon VB-H630D Owner's Manual Page 64

Comments to this Manuals

Related products and manuals for Document cameras Canon VB-H630D