3-4
Setting Automatic Document Deletion (Erase Failed TX)
Setting/Storing the Communications Settings
3
Setting Automatic Document Deletion
(Erase Failed TX)
When transmission of a document has failed, this function automatically erases that document
from memory.
NOTE
• The default setting is ‘On.’
1
Call up the desired screen as follows:
➔ [Communications Settings] ➔ (Common Settings) [TX Settings] ➔ [Erase Failed TX]
2
Select [On] or [Off], and press [OK].
[On]: Erases jobs after sending, whether transmission ends normally or with an error.
[Off]: Stores a job in memory if transmission ends in an error.
The specified mode is set.
IMPORTANT
• Even if the Erase Failed TX is set to ‘Off’, the documents sent with Direct Sending for fax or the ones sent from the
fax driver do not remain in memory when the transmission ends in an error.
3
Press [Done] repeatedly until the Basic Features screen appears.
Comments to this Manuals