Canon PIXMA MX350 User's Guide download pdf (Page 82)

Security

Phaser 4600/4620

System Administrator Guide

802.1X Authentication

This is the procedure to follow to install and setup 802.1X Authentication:

1. Overview on page 76

2. Information Checklist on page 76

3. Enable 802.1X on page 76

Overview

The Xerox machine supports IEEE 802.1X Authentication via Extensible Authentication Protocol (EAP).

IEEE 802.1X ensures all machines on the network are authenticated and authorized to use the

network. 802.1X can be enabled for machines connected through wired Ethernet networks.

The Administrator can configure the machine to use one EAP type. EAP types supported on the Xerox

machine are:

•EAP-MD5

• PEAPv0/EAP-MS-CHAPv2

•EAP-MS-CHAPv2

•EAP-TLS

Note EAP-TLS may only be configured via Centre Ware Internet Services

Information Checklist

1. 802.1X authentication must be supported on the network where Xerox machines are connected.

2. Ensure that your 802.1X Authentication Server and authentication switch are available on the

network.

3. Create a Username and Password on your Authentication Server which will be used to

authenticate the machine.

Note Write down the Username and Password and keep in a safe place.

Enable 802.1X

Enable 802.1X at the machine

1. Press the Menu button on the machine and select Tools.

2. Enter the Administrator’s Password. The default is 1111 and press the OK button

3. Select Setup and press the OK button.

4. Select Network Settings and press the OK button.

5. Select Network Services and press the OK button.

6. Select 802.1x and press the OK button.

7. Select On and press the OK button.

8. Select the EAP type used on the network and press the OK button.

9. Using the number keys, enter the User Name then press the OK button.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 150 151

No comments

Canon PIXMA MX350 User's Guide Page 82