Canon imageCLASS MF7470 User Manual download pdf (Page 128)

100

101

4-17

PreviousBack Next

TOP

Before Using the

Machine

Original and Paper

Copying

Sending and

Receiving

Printing and

Scanning

Network (imageCLASS

MF7480/MF7470 Only)

Remote UI (imageCLASS

MF7480/MF7470 Only)

System Settings

Maintenance

Troubleshooting

Appendix

Index

Table of Contents

7. Press (Start).

If the original is placed on the platen glass, follow the instructions

that appear on the touch panel display, then press

(Start) once for

each original. When scanning is complete, press [Done].

Scanning starts.

The scanned data is sent to the specified destination when scanning

is complete.

To cancel the scan settings, press [Scan Settings], then [Option],

then [Cancel].

To cancel all settings and return the machine to the Standard

mode, press

(Reset).

Automatic Density Adjustment

The machine automatically adjusts the scan density to the level

best suited to the quality of the original.

If you select the Color mode, automatic density adjustment cannot be

used.

If you set the automatic density adjustment, the original type setting is

disabled.

1. Press (SEND).

2. Place your originals.

3. Specify the destination.

4. Press [Scan Settings].

5. Press [Option].

–

6. Press [A], then press [OK].

The machine automatically adjusts the scan density to the level best

suited to the quality of the original.

An automatic scan density adjustment may not work with

transparencies. In this case, adjust the scan density manually by

pressing [Light] or [Dark].