Canon PIXMA MG3650 User Manual Page 467

  • Download
  • Add to my manuals
  • Print
  • Page
    / 676
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 466
Check12
Make sure Enable bidirectional support is selected in Ports sheet of
properties dialog box of printer driver. (Windows)
Check13
Make sure security software's firewall is off.
If your security software's firewall is on, a message may appear warning you that Canon software is attempting
to access the network. If this warning message appears, set security software to always allow access.
If you are using any programs that switch between network environments, check their settings. Some programs
use a firewall by default.
Check14
If using a router, connect machine and computer to LAN side (same network
segment).
Check15
If machine is connected to an AirPort Base Station via LAN, use alphanumeric
characters for network name (SSID). (Mac OS)
Check16
Check machine's TCP/IP setting and disable IPv6.
To check the current TCP/IP setting, print out the network setting information using the operation panel.
Printing Network Settings
If "TCP/IPv6" is set to "Enable", both IPv4 and IPv6 are enabled.
Press and hold Stop button and release it when Alarm lamp flashes 23 times.
IPv6 is disabled and only IPv4 is enabled.
If the problem is not resolved, redo setup.
For Windows:
Use the Setup CD-ROM or follow the instructions on the Canon website.
For Mac OS:
Follow the instructions on the Canon website.
481
Page view 466
1 2 ... 462 463 464 465 466 467 468 469 470 471 472 ... 675 676

Comments to this Manuals

No comments