Canon PIXMA MG3650 User Manual Page 563

  • Download
  • Add to my manuals
  • Print
  • Page
    / 676
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 562
If you are using a relay device such as a USB hub, disconnect it, connect the machine directly to the
computer, and retry the printing. If printing starts normally, there is a problem with the relay device.
Contact the vendor of the relay device.
There could also be a problem with the USB cable. Replace the USB cable and retry the printing.
If you use the machine over a LAN, make sure the machine is correctly set up for network use.
Check4
Make sure MP Drivers are installed correctly.
Uninstall the MP Drivers following the procedure described in Deleting the Unnecessary MP Drivers and
reinstall them from the Setup CD-ROM or the Canon website.
Check5
When machine is connected to your computer with a USB cable, check
device status from your computer.
Follow the procedure below to check the device status.
1.
Open the Device Manager on your computer as shown below.
If User Account Control screen is displayed, follow the on-screen instructions.
In Windows 8.1 or Windows 8, select Control Panel from Settings charm on Desktop > Hardware
and Sound > Device Manager.
In Windows 7 or Windows Vista, click Control Panel, Hardware and Sound, and Device Manager.
In Windows XP, click Control Panel, Performance and Maintenance, System, and Device
Manager on Hardware sheet.
2.
Double-click Universal Serial Bus controllers and USB Printing Support.
If USB Printing Support Properties screen does not appear, make sure the machine is correctly
connected to the computer.
Check3
Make sure machine is properly connected to computer.
3.
Click General tab and check for a device problem.
If a device error is shown, see Windows Help to resolve it.
Other Error Messages (Windows)
Check
If an error message appears outside printer status monitor, check the
following:
"Could not spool successfully due to insufficient disk space"
Delete any unnecessary files to increase the amount of free space on the disk.
"Could not spool successfully due to insufficient memory"
Close other applications to increase the available memory.
If you still cannot print, restart your computer and retry the printing.
"Printer driver could not be found"
Uninstall the MP Drivers following the procedure described in Deleting the Unnecessary MP Drivers and
reinstall them from the Setup CD-ROM or the Canon website.
577
Page view 562
1 2 ... 558 559 560 561 562 563 564 565 566 567 568 ... 675 676

Comments to this Manuals

No comments