Canon PIXMA MG3650 User Manual Page 490

  • Download
  • Add to my manuals
  • Print
  • Page
    / 676
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 489
To check the settings of your smartphone/tablet, refer to the instruction manual provided with it.
If the network settings of your smartphone/tablet are not identical with those of the wireless router, change the
network settings of it to match with those of the wireless router.
Check5
Make sure machine is not placed far away from wireless router.
The wireless router is located indoors within the effective range for wireless communication. Locate the
machine within 164 ft. / 50 m from the wireless router.
Check6
Check for obstructions.
Wireless communication between different rooms or floors is generally poor. Move the machine and wireless
router as necessary.
Check7
Make sure there is no source of radio wave interference nearby.
If a device like a microwave oven that emits radio waves of the same frequency bandwidth as a wireless router
is nearby, it may cause interference. Place the wireless router as far away from the interference source as
possible.
Cannot Communicate with Machine while It Is in Access Point Mode
If your smartphone/tablet cannot communicate with the machine in the access point mode, check the
following.
Check1
Make sure machine is turned on.
Check2
Enable access point mode.
Enable the access point mode following the procedure below.
1.
Press and hold Wi-Fi button, and then release button when ON lamp flashes.
2.
Press Black button, Color button, and then Wi-Fi button in this order.
The ON lamp changed from flashing to lit and the access point mode is enabled.
Check3
Check settings of your smartphone/tablet.
Make sure your smartphone/tablet can use the wireless LAN.
For more on performing setting of the wireless LAN, refer to the instruction manual provided with your
smartphone/tablet.
Check4
Have you selected machine as destination of your smartphone/tablet?
Select the access point name (SSID) of the machine with your smartphone/tablet.
Check5
Have you entered proper password specified for access point mode?
If the security setting of the access point mode is enabled, you need to enter the password to connect your
smartphone/tablet to the machine.
Check6
Make sure machine is not too far away.
504
Page view 489
1 2 ... 485 486 487 488 489 490 491 492 493 494 495 ... 675 676

Comments to this Manuals

No comments