Canon PIXMA MX725 User Manual download pdf (Page 145)

2801

Cause

The document is jammed in the ADF.

Action

Remove the document following the procedure below.

Important

The power cannot be turned off while the machine is sending or receiving a fax, or when the received

fax or the unsent fax are stored in the machine's memory.

Make sure if the machine completed sending or receiving all the faxes before disconnecting the power

cord.

If you unplug the power cord, all the faxes stored in the machine's memory are deleted.

• If the original remains in the ADF by pressing the Stop button while the machine is

scanning the document:

If you press the Stop button during scanning then the document remained in the ADF, the message

about the paper remained in the ADF appears on the LCD. Press the OK button so that the remaining

document is automatically fed out.

• If the original is jammed in the ADF:

Remove the document following the procedure below.

1. If printing is in progress, press the Stop button.

2. Turn off the machine.

3. If a multi-page document is loaded, remove any pages other than the jammed page from the ADF,

then open the document feeder cover.

Raise the paper release lever, then pull out the jammed page in the ADF, either from the

document tray or from the document output slot, whichever is easier.

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 235 236

No comments

Canon PIXMA MX725 User Manual Page 145