Canon PIXMA MX725 User Manual download pdf (Page 56)

Printing Does Not Start

• Check 1: Make sure that the power plug is securely plugged in, then

turn the machine on.

While any lamp on the operation panel is flashing, the machine is initializing. Wait until the lamp stops

flashing and remains lit.

Note

When printing large data such as a photo or graphics, it may take longer to start printing. While

any lamp on the operation panel is flashing, the computer is processing data and sending it to the

machine. Wait until printing starts.

• Check 2: Make sure that the machine is connected to your computer

properly.

When the machine is connected to your computer with a USB cable, make sure that the USB cable is

securely plugged in to the machine and the computer, then check the followings:

•

If you are using a relay device such as a USB hub, disconnect it, connect the machine directly to

the computer, and try printing again. If printing starts normally, there is a problem with the relay

device. Consult the reseller of the relay device for details.

• There could also be a problem with the USB cable. Replace the USB cable and try printing again.

When you use the machine over LAN, make sure that the machine is connected to the network with a

LAN cable or is set up correctly.

•

Check 3: If you are printing from the computer and there are any

unnecessary print jobs, delete them.

Deleting the Undesired Print Job

•

Check 4: Make sure that your machine's name is selected in the Print

dialog.

The machine will not print properly if you are using a printer driver for a different printer.

Make sure that your machine's name is selected in Printer in the Print dialog.

Note

To make the machine the one selected by default, select the machine for Default printer.

• Check 5: Restart your computer if you are printing from the computer.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 235 236

No comments

Canon PIXMA MX725 User Manual Page 56