Canon imagePROGRAF iPF9400S User Manual download pdf (Page 113)

Immediately after borderless printing, the trailing edge margin is soiled during regular printing

Cause Corrective Action

Depending on your printing environment, after bor-

derless printing in which the leading and trailing edge

of the roll is cut automatically, any ink adhering to the

cutter unit may rub off on the next printed document.

Follow these steps to change the Between Pages setting of Drying Time to a val-

ue between about 30 seconds and 3 minutes before trying borderless printing

again.

On the Main sheet of the printer driver, click Advanced Settings by Media

Type.

Select an ink drying time in the list for the Between Pages setting of Drying

Time.

Printed colors are inaccurate

Cause Corrective Action

Color adjustment has not been activated in the Advanced

Settings of the printer driver.

In the Advanced Settings of the printer driver, access Color Settings in

Color Mode to adjust colors.

(See "Main Sheet (Windows).") →User's Guide

(See "Main Pane (Mac OS X).") →User's Guide

Colors have not been adjusted on the computer or monitor. Refer to the computer and monitor documentation to adjust the colors.

Adjust the settings of the color management software, referring to the soft-

ware documentation as needed.

The Printhead nozzles are clogged. Print a test pattern to check the nozzles and see if they are clogged.

(See "Checking for Nozzle Clogging.") →User's Guide

In the Windows printer driver, Application Color Matching

Priority is not selected.

Click Special Settings on the Layout sheet of the printer driver and se-

lect Application Color Matching Priority in the dialog box.

(See "Layout Sheet (Windows).") →User's Guide

There may be a slight difference in how colors are printed af-

ter Printhead replacement because of individual variation

among printheads.

Execute color calibration.

(See "Corrects slight differences in how colors appear (color calibration).")

→User's Guide

Printhead characteristics gradually change through repeated

use, and colors may change.

Execute color calibration.

(See "Corrects slight differences in how colors appear (color calibration).")

→User's Guide

Color may change slightly even on the same model of printer

if you use a different version of the firmware or printer driver,

or when you print under different settings or in a different

printing environment.

Follow these steps to prepare the printing environment.

Use the same version of firmware or printer driver.

(See "Updating the Firmware.") →User's Guide

Specify the same value for all settings items.

Execute color calibration.

(See "Corrects slight differences in how colors appear (color calibra-

tion).")

→User's Guide

When reinstalling the printer driver, you changed the region

selection of the Media Configuration Tool.

Changing the region selection of the Media Configuration

Tool deletes the region-specific paper information originally

registered on the printer before installation. Using paper with

deleted information when executing color calibration will pre-

vent the resulting calibration adjustment value from being ap-

plied to all other types of the paper.

Prepare paper compatible with calibration in the newly selected region

and perform calibration again.

(See "Corrects slight differences in how colors appear (color calibration).")

→User's Guide

Banding in different colors occurs

Cause Corrective Action

The paper feed amount is out of adjust-

ment.

Adjust the feed amount.

(See "Adjusting the Feed Amount.") →User's Guide

iPF9400S

Immediately after borderless printing, the trailing edge margin is soiled during regular printing

Basic Guide

Troubleshooting Problems with the printing quality

113

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 153 154

Comments to this Manuals

No comments

Canon imagePROGRAF iPF9400S User Manual Page 113

Comments to this Manuals

Related products and manuals for Printers Canon imagePROGRAF iPF9400S