Canon imagePROGRAF iPF9400S User Manual download pdf (Page 136)

Cause Corrective Action

There are sheets left on the

Ejection Guide.

If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press

the OK button.

Printing will resume, starting from the page on which the error occurred.

(See "Loading Rolls in the Printer.") →P.11

There is a foreign object by

the Output Tray, obstructing

the Cutter Unit.

Lift the Top Cover and remove the foreign object.

If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press

the OK button.

Printing will resume, starting from the page on which the error occurred.

You are not using the printer

under the recommended envi-

ronmental conditions for the

paper.

Use the printer only where the recommended environmental conditions for the paper are met. Note that

various environmental conditions are recommended for various types of paper. For details on the recom-

mended environmental conditions, see the Paper Reference Guide.

(See Paper Reference Guide.)

You are using paper that is

not compatible with automatic

cutting.

Specify Manual as the cutting method and use scissors or a cutting tool to cut the roll.

(See "Specifying the Cutting Method for Rolls.") →User's Guide

For information about paper that is compatible with automatic cutting, see the Paper Reference Guide.

(See Paper Reference Guide.)

Lift the Release Lever and remove the paper.

In other cases, the Cutter Unit

may be damaged.

Contact your Canon dealer for assistance.

End of paper feed.

Cause Corrective Action

Although an attempt was made to advance the paper manually, it reached the

limit position that can be advanced.

Canceling manual advancing.

(See "Feeding Roll Paper Manually.") →User's Guide

Paper can be retracted only up to 17 mm (0.7 in) when using the Media Take-up

Unit.

Canceling manual advancing.

Rel lever is in wrong position.

Cause Corrective Action

The Release Lever is up. Lower the Release Lever.

If the error occurs again, turn off the printer and wait a while before restoring power.

Rewinding error.

Cause Corrective Action

There is some foreign object near the Media Take-up Unit

sensor and the roll cannot be detected.

Remove the foreign object near the sensor.

The Media Take-up Unit sensor is soiled and the roll cannot

be detected.

Wipe the sensor with a dry cloth to clean it.

The roll is out of range of detection by the Media Take-up

Unit sensor.

Reload the roll.

Press the OK button to clear the error.

(See "Loading Rolls in the Printer.") →P.11

(See "Loading the Rewind Spool on the Media Take-up Unit.")

→User's Guide

A paper jam has occurred and the roll cannot be rewound. Remove the paper from the Media Take-up Unit.

Press the OK button to clear the error.

The Media Take-up Unit sensor is damaged. Contact your Canon dealer for assistance.

*1: Printing will stop momentarily if an error involving the Media Take-up Unit occurs. If you prefer printing not to stop, set Skip Take-

Up Err to On. However, note that this error may cause paper jams and affect the printing quality.

End of paper feed.

iPF9400S

Basic Guide

Error Message Messages regarding paper

136

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 153 154

Comments to this Manuals

No comments

Canon imagePROGRAF iPF9400S User Manual Page 136

Comments to this Manuals

Related products and manuals for Printers Canon imagePROGRAF iPF9400S