Canon imagePROGRAF iPF9400S User Manual download pdf (Page 143)

Move the blue platen switch No.xx to the right. (xx represents a number)

Cause Corrective Action

The printer has detected that the blue Switch on the platen needed in

maintenance during printing is set away from the ● mark.

Set blue platen Switch of the indicated number toward the ● side.

(See "Setting the Blue Switch on the Platen.") →P.115

Cannot adjust paper feed.

Cause Corrective Action

The Printhead nozzles are clogged. Execute Adj. Quality again, as follows.

Press the OK button to clear the error.

Print a test pattern to check the nozzles.

(See "Checking for Nozzle Clogging.") →User's Guide

Clean the Printhead if the nozzles are clogged.

(See "Cleaning the Printhead.") →P.55

Execute Adj. Quality again.

(See "Automatic Banding Adjustment.") →P.98

Highly transparent film is loaded that cannot be used

for automatic feed amount adjustment.

Press the OK button to clear the error, and then adjust the feed amount manually.

(See "Manual Banding Adjustment (Adj. Quality).") →User's Guide

Check printed document.

Cause Corrective Action

The Printhead nozzles are becoming clogged. If printing is faint, clean the Printhead.

(See "Cleaning the Printhead.") →P.55

iPF9400S

Move the blue platen switch No.xx to the right. (xx represents a number)

Basic Guide

Error Message Messages regarding printing or adjustment

143

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 153 154

No comments

Canon imagePROGRAF iPF9400S User Manual Page 143