Canon imagePROGRAF iPF9400S User Manual download pdf (Page 145)

Cannot recognize print head x. (x is L, R, or not displayed)

Cause Corrective Action

No Printhead is installed. Follow these steps to install the Printhead.

Open the Top Cover.

Install the Printhead L if Printhead L is displayed and the Printhead R if Printhead R is displayed. If neither

left or right is indicated, install both Printhead L and Printhead R.

(See "Replacing the Printhead.") →P.34

The Printhead cannot be

recognized because it is

not installed correctly.

Follow these steps to reinstall the Printhead.

Open the Top Cover.

Reinstall the Printhead L if Printhead L is displayed and the Printhead R if Printhead R is displayed. If nei-

ther left nor right is indicated, re-install both Printhead L and Printhead R.

(See "Replacing the Printhead.") →P.34

Execute printhead cleaning.

Cause Corrective Action

The Printhead noz-

zles are clogged.

Follow these steps to clean the Printhead.

Stop printing by pressing ▲ or ▼ to select Stop Printing.

Clean the Printhead.

(See "Cleaning the Printhead.") →P.55

If the message is still displayed when printing, replace the Printhead.

(See "Replacing the Printhead.") →P.34

Press ▲ or ▼ to select Print, and then press the OK button to resume printing. However, note that this error may

affect the printing quality.

If OK is shown on the Display Screen, clean the Printhead.

Press the OK button on the Control Panel to stop printing.

Clean the Printhead.

(See "Cleaning the Printhead.") →P.55

If the message is still displayed when printing, replace the Printhead.

(See "Replacing the Printhead.") →P.34

iPF9400S

Cannot recognize print head x. (x is L, R, or not displayed)

Basic Guide

Error Message Messages regarding printheads

145

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 153 154

No comments

Canon imagePROGRAF iPF9400S User Manual Page 145