Canon EOS-1D X User Manual download pdf (Page 300)

100

101

300

Whenever you set the power switch to <1/R> or <2>, the

Self Cleaning Sensor Unit operates to automatically shake off the dust

on the front of the sensor. Normally, you need not pay attention to this

operation. However, you can select to perform sensor cleaning at any

time, or disable it.

Select [Sensor cleaning].

Under the [53] tab, select [Sensor

cleaning], then press <0>.

Select [Clean nowf].

Select [Clean nowf], then press

<0>.

Select [OK] on the dialog screen,

then press <0>.

X The screen will indicate that the

sensor is being cleaned. Although

there will be a shutter sound during

the cleaning, a picture is not taken.

In step 2, select [Auto cleaningf] and set it to [Disable].

X The sensor cleaning will no longer be executed when you set the

power switch to <1/R> or <2>.

f Automatic Sensor Cleaning

Cleaning the Sensor Now

Disabling Automatic Sensor Cleaning

For best results, perform the sensor cleaning with the camera placed

upright and stable on a table or other flat surface.

Even if you repeat the sensor cleaning, the result will not improve much.

Immediately after the sensor cleaning is finished, the [Clean nowf]

option will remain disabled temporarily.

1 2 ... 295 296 297 298 299 300 301 302 303 304 305 ... 431 432

Comments to this Manuals

No comments

Canon EOS-1D X User Manual Page 300

Comments to this Manuals

Related products and manuals for Camcorders Canon EOS-1D X