Canon mx860 User Manual download pdf (Page 824)

100

101

dvanced Guide

Troubleshooting > An Error Message Is Displayed on the LCD

An Error Message Is Displayed on the LCD

If an error message is displayed on the LCD, take the corresponding action described below.

Message

ction

The ink may have run out.

Replacing the ink tank is

recommended.

U041

If the lamp on the ink tank is flashing, ink may have run out.

Replacing the ink tank is recommended.

If printing is in progress and you want to continue printing,

press the

button with the ink tank installed. Then printing

can continue. Replacing the ink tank is recommended after

the printing. The machine may be damaged if printing is

continued under the ink out condition.

Routine Maintenance

Note

If multiple ink lamps are flashing red, see Routine

Maintenance

and check the status of each ink tank.

Since printing in this condition may cause the contents

of the fax to be lost, the machine stores received faxes

in memory without printing until the ink tank is replaced.

Print the fax stored in memory manually after replacing

the ink tank. You can set the machine to print received

faxes forcibly without storing them in memory, but a part

of contents or all contents of the fax may not be printed.

Print head is not installed.

Install the print head.

U051

The type of print head is incorrect.

Install the correct print head.

U052

Follow the directions given in your setup sheet to install the

Print Head.

If the Print Head is already installed, remove the Print Head

once and then reinstall it.

If the error is not resolved, the Print Head may be damaged.

Contact the service center.

Some ink tanks are not installed in

place.

U072

More than one ink tank of the following

color is installed.

U071

Some ink tanks are not installed in the correct position.

(The lamp on the ink tank flashes.)

More than one ink tanks of the same color are installed.

(The lamp on the ink tank flashes.)

Confirm that the ink tanks are installed in the appropriate

positions.

Routine Maintenance

The remaining level of the ink cannot be

correctly detected.

U130

The remaining ink level cannot be correctly detected. (The

lamp on the ink tank flashes.)

Replace the ink tank and close the Scanning Unit (Cover).

Printing with an ink tank that was once empty may damage

the machine.

If you want to continue printing in this condition, you need to

release the function for detecting the remaining ink level.

Press and hold the

Stop

button for at least 5 seconds, and

then release it.

With this operation, releasing the function for detecting the

remaining ink level is memorized Please be advised that

Canon shall not be liable for any machine malfunction or

damage caused by refilled ink tanks.

Routine Maintenance

Note

If the function for detecting the remaining ink level is

disabled, the ink tank in gray is displayed on the LCD

when checking the current ink level.

Routine Maintenance

Since printing in this condition may cause the contents

of the fax to be lost, the machine stores received faxes

in memory without printing until the ink tank is replaced.

Page 824 of 997 pagesAn Error Message Is Displayed on the LCD

1 2 ... 819 820 821 822 823 824 825 826 827 828 829 ... 996 997

Comments to this Manuals

No comments

Canon mx860 User Manual Page 824

Comments to this Manuals

Related products and manuals for Printers Canon mx860