Canon mx860 User Manual download pdf (Page 825)

100

101

Print the fax stored in memory manually after replacing

the ink tank. You can set the machine to print received

faxes forcibly without storing them in memory, but a part

of contents or all contents of the fax may not be printed.

The following ink tank cannot be

recognized.

U043

U140

U150

The ink tank is not installed. Install the ink tank.

Routine Maintenance

The ink tank is not compatible with this machine. (The

lamp on the ink tank is off.)

Install an appropriate ink tank.

Routine Maintenance

n ink tank error has occurred. (The lamp on the ink tan

is off.)

Replace the ink tank.

Routine Maintenance

The ink has run out.

Replace the ink tank.

U163

Ink has run out. (The lamp on the ink tank flashes.)

Replace the ink tank and close the Scanning Unit (Cover).

Printing under the current condition may damage the

machine.

If you want to continue printing in this condition, you need to

release the function for detecting the remaining ink level.

Press and hold the

Stop

button for at least 5 seconds, and

then release it.

With this operation, releasing the function for detecting the

remaining ink level is memorized. Please be advised that

Canon shall not be liable for any malfunction or trouble

which may be caused by continuation of printing under the

ink out condition.

Routine Maintenance

Note

If the function for detecting the remaining ink level is

disabled, the ink tank in gray is displayed on the LCD

when checking the current ink level.

Routine Maintenance

Since printing in this condition may cause the contents

of the fax to be lost, the machine stores received faxes

in memory without printing until the ink tank is replaced.

Print the fax stored in memory manually after replacing

the ink tank. You can set the machine to print received

faxes forcibly without storing them in memory, but a part

of contents or all contents of the fax may not be printed.

There is no photo data. There is no image data saved on the memory card that

can be read by this machine.

The machine may not recognize the file if the file name or

the folder path contains certain characters. Use only

alphanumeric characters.

Photo data edited or processed on a computer must be

printed from the computer.

The ink absorber is almost full.

Press

to continue printing.

Contact the service center.

The ink absorber is almost full.

Press the machine's

button to continue printing. Contact

the service center.

Printer error has occurred.

Contact the service center.

The machine error has occurred.

Contact the service center.

Timeout error has occurred.

Press OK.

Some errors occurred while copying and a certain time

passed.

Press the

button to dismiss the error, and try to copy

again.

Incompatible device detected.

Remove the device.

Check the device connected to the Direct Print Port.

Printing photos directly is possible with a PictBridge

compliant device or the optional Bluetooth Unit BU-30.

communication time out occurs if an operation takes

too lon

or if it takes too much time to send data. This

Page 825 of 997 pagesAn Error Message Is Displayed on the LCD

1 2 ... 820 821 822 823 824 825 826 827 828 829 830 ... 996 997

Comments to this Manuals

No comments

Canon mx860 User Manual Page 825

Comments to this Manuals

Related products and manuals for Printers Canon mx860