Canon EOS-1D X User Manual download pdf (Page 145)

100

101

145

O Custom White Balance

Photograph a solid-white object.

The plain, white object should fill the

spot metering circle.

Focus manually and set the standard

exposure for the white object.

Any white balance setting can be set.

X The Custom WB data will be

registered.

To use the Custom WB, see

“Selecting and Shooting with the

Custom WB Data” (p.147).

Spot metering circle

Custom WB data can also be registered as follows:

1. Press the <B> button and turn the <5> dial to select <O>

(p.143).

2. Then turn the <6> dial to select the number under which the

Custom WB is to be registered.

3. Press the <J> button.

→ [ * ] will blink on the top LCD panel.

4. Follow step 4 above to photograph a solid-white object.

→ The Custom WB data will be registered under the selected number.

When a picture is taken, the registered Custom white balance will be

applied.

If the exposure of the picture differs greatly from the standard exposure,

a correct white balance might not be obtained. If [Correct WB may not

be obtained with the selected image] is displayed in step 4, go back to

step 1 and try again.

The image captured in step 4 will not be recorded to the card.

Instead of a white object, an 18% gray card can produce a more

accurate white balance.

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 431 432

Comments to this Manuals

No comments

Canon EOS-1D X User Manual Page 145

Comments to this Manuals

Related products and manuals for Camcorders Canon EOS-1D X