Canon imagePROGRAF iPF9400 User Manual download pdf (Page 80)

Remove the Stand by reversing the installation procedure, when it was attached to the printer.

Disassemble and repackage the Stand by following the installation procedure (with six people lifting the

printer) in reverse.

Important

• Do not use the procedure for rotated installation (installing by rotating the printer). This may damage the print-

er. For details, see Setup Guide.

Repack the Roll Holder, Holder Stopper, and printer in shipping materials, and then package them in a

shipping box.

Reinstalling the Printer

The basic workflow for reinstalling the printer is as follows.

For detailed instructions, see the Setup Guide.

Assemble the stand

Referring to the Printer Stand Setup Guide, assem-

ble the Stand.

Caution

• The Stand must be assembled by at least two people on a flat surface. Attempting assembly by yourself poses

a risk of injury or bending the Stand.

• When assembling the Stand, lock the casters. In addition, always unlock the casters before moving the as-

sembled Stand. Attempting to move the stand when the casters are locked poses a risk of injury or damage to

the location site.

Install the printer

Mount the printer on the assembled Stand and tight-

en the screws firmly.

Reinstalling the Printer

iPF9400

Basic Guide

Printer Relocation Preparing to Transfer the Printer

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 153 154

No comments

Canon imagePROGRAF iPF9400 User Manual Page 80