Canon imagePROGRAF iPF9400S User Manual Page 114
- Page / 154
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Cause Corrective Action
Printing does not proceed smoothly be-
cause print jobs are interrupted during
transmission.
Exit other applications and cancel other print jobs.
In the Control Panel menu, Adj. Priority
is set to Print Length.
Setting Adj. Priority to Print Quality in the Control Panel menu and adjusting the feed
amount may improve results.
(See "Adjusting the Feed Amount.") →User's Guide
The Printhead is out of alignment. Adjust the Printhead alignment.
(See "Automatic Adjustment to Straighten Lines and Colors.") →P.95
The Printhead nozzles are clogged. Print a test pattern to check the nozzles and see if they are clogged.
(See "Checking for Nozzle Clogging.") →User's Guide
Streaks may occur if you set the Print
Quality too low.
Choose a higher level of Print Quality in the Advanced Settings of the printer driver and try
printing again.
Printing in Fast or Standard mode is faster and consumes less ink than in Highest quality or
High modes, but the printing quality is lower.
(See "Giving Priority to Particular Graphic Elements and Colors for Printing.") →User's Guide
The type of paper specified in the printer
driver does not match the type loaded in
the printer.
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.") →P.11
(See "Loading Sheets in the Printer.") →P.18
Make sure the same type of paper is specified in the printer driver as you have loaded in the
printer.
1.
Press the Stop button and stop printing.
2.
Change the type of paper in the printer driver and try printing again.
Colors in printed images are uneven
Colors in printed images are uneven
Cause Corrective Action
Line Drawing/Text is selected when
printing images in many solid colors.
In Print Priority in the Advanced Settings of the printer driver, choose Image.
You are printing on paper that curls easily. Printed colors may appear uneven on the leading edge of paper that is susceptible to curling.
Select a stronger level in VacuumStrngth in the Control Panel menu to increase suction
against the paper, or specify a leading margin of 20 mm (0.79 in) or more.
(See "Adjusting the Vacuum Strength (VacuumStrngth).") →User's Guide
Printed colors may be uneven if you set
the Print Quality too low.
Choose a higher level of Print Quality in the Advanced Settings of the printer driver.
Printing in Fast or Standard mode is faster and consumes less ink than in Highest quality or
High modes, but the printing quality is lower.
(See "Giving Priority to Particular Graphic Elements and Colors for Printing.") →User's Guide
Color may be uneven between dark and
light image areas.
Select Unidirectional Printing in the Advanced Settings of the printer driver.
When borderless printing is used, the
edge of the paper is cut during printing.
Thus, ink density may be slightly uneven
at the leading edges.
Specify No in Auto Cut in the printer driver before printing. In this case, the paper can be
printed without borders on the left and right sides only. Cut the printed document ejected from
the printer, and then use scissors or a cutting tool to cut away the edges on the top and bot-
tom.
Choose a higher level of Print Quality in the Advanced Settings of the printer driver.
(See "Giving Priority to Particular Graphic Elements and Colors for Printing.") →User's Guide
The Printhead is out of alignment. Adjust the Printhead alignment.
(See "Automatic Adjustment to Straighten Lines and Colors.") →P.95
Allowing printed documents to dry on top
of each other may cause uneven colors.
To avoid uneven colors, we recommend drying each sheet separately.
Density may be uneven if you use Glossy
Paper or Canon Coated Paper.
In Advanced Settings of the printer driver, choose Highest quality or High in Print Quality.
The type of paper specified in the printer
driver does not match the type loaded in
the printer.
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.") →P.11
(See "Loading Sheets in the Printer.") →P.18
Colors in printed images are uneven
iPF9400S
Basic Guide
Troubleshooting Problems with the printing quality
114
- Basic Guide 1
- Safety Precautions 2
- In an Emergency 3
- Cleaning the Printer 3
- Pacemakers 3
- Moving the Printer 3
- FCC Regulations (U.S.A) 4
- For CA, USA Only 5
- Trademarks 5
- Copyright 5
- Legal Notice 5
- Manuals for this printer 6
- About This User Manual 7
- Handling Paper 9
- Loading Rolls in the Printer 11
- Handling Paper Handling rolls 15
- Handling sheets 18
- Loading Sheets in the Printer 19
- Removing Sheets 21
- Consumables and Maintenance 23
- How to replace an Ink Tank 24
- Confirm the message 24
- Remove the Ink Tank (330 ml) 25
- Remove the Ink Tank (700 ml) 26
- Replacing Ink Tanks 27
- Load the Ink Tank (330 ml) 28
- Load the Ink Tank (700 ml) 30
- Printheads 34
- Replace the Printhead 36
- Replacing the Printhead 37
- Cutter Unit 42
- Replacing the Cutter Unit 43
- Maintenance Cartridge 46
- Replacing the Shaft Cleaner 50
- Printer Parts 57
- Menu Operations 58
- Accessing menus 59
- Specifying menu items 60
- Specifying numerical values 60
- Executing menu commands 61
- Menu Structure 62
- Ink Menu 63
- Job Menu 63
- Set./Adj. Menu 64
- Printer parts 68
- (See "Stand.") 69
- Top Cover (Inside) 70
- Carriage 71
- Ink Tank Cover (Inside) 72
- Printer Relocation 74
- Remove paper 75
- Removing Ink Tanks 76
- Pack the printer 78
- Reinstalling the Printer 80
- Software Installation 84
- Installing the Software 86
- 2. Access the Main pane 89
- Borderless Printing 91
- Enlarged/Reduced Printing 93
- Starting from Adobe Photoshop 94
- Adjusting the Printhead 95
- Adjusting the feed amount 97
- Automatic Banding Adjustment 99
- Troubleshooting 100
- Important 101
- Clearing Jammed Roll Paper 101
- Clearing a Jammed Sheet 103
- Cause Corrective Action 105
- →User's Guide 107
- Printing does not start 108
- Number Dimensions 117
- Cannot print over a network 121
- Installation problems 123
- Other problems 125
- Ink level detection 126
- Releasing ink level detection 126
- Ink Level Detection 127
- Error Message 129
- Messages regarding ink 139
- Paper Reference Guide.) 141
- Messages regarding printheads 144
- Other Messages 149
- Error Message Other Messages 150
- Error Messages 151
Related products and manuals for Printers Canon imagePROGRAF iPF9400S
Printers Canon PIXMA PRO-1 User Manual
(318 pages)
(318 pages)
Printers Canon PIXMA PRO-1 User Manual
(4 pages)
(4 pages)
Printers Canon imagePROGRAF iPF8400 User Manual
(157 pages)
(157 pages)
Printers Canon PIXMA iP100 User Manual
(2 pages)
(2 pages)
Printers Canon PIXMA iP100 User Manual
(92 pages)
(92 pages)
Printers Canon imagePROGRAF iPF610 User Manual
(746 pages)
(746 pages)
Printers Canon imagePROGRAF iPF510 User Manual
(724 pages)
(724 pages)
Printers Canon PIXMA iX6520 User Manual
(28 pages)
(28 pages)
Printers Canon imagePROGRAF iPF8400S User Manual
(160 pages)
(160 pages)
Printers Canon imagePROGRAF iPF655 User Manual
(948 pages)
(948 pages)
(2 pages)© 2020, manymanuals.com. All rights reserved. | 0.522 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals