Canon imagePROGRAF iPF9400S User Manual Page 35

  • Download
  • Add to my manuals
  • Print
  • Page
    / 154
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 34
Important
There may be ink around the nozzles of the Printhead you remove. Handle the Printhead carefully during replacement.
The ink may stain clothing.
Do not open the Printhead pouch until immediately before installation. After removing the Printhead from the pouch,
install it right away. If the Printhead is left after the pouch is opened, the nozzles may dry out, which may affect printing
quality.
Access the menu for Printhead replacement
Caution
When replacing the Printhead immediately after printing, wait a few minutes before replacing it. The metal parts of the
Printhead become hot during printing, and there is a risk of burns from touching these parts.
Important
Your hands may become dirty during Printhead replacement. Use the gloves provided with the new Printhead for re-
placement.
Note
Prepare a new Ink Tank when ink levels are low.
When the remaining capacity of Maintenance cartridge is low, prepare a new Maintenance cartridge.
1
Remove any paper that has been advanced by selecting Eject Paper in the Control Panel menu.
When using a roll, rewind it.
(See "Removing the Roll from the Printer.") →P.15
When using sheets, remove the sheet.
(See "Removing Sheets.")
→P.21
2
Clean inside the Top Cover. (See "Cleaning Inside the Top Cover.") →P.53
3
On the Tab Selection screen of the Control Panel, press or
to select the Settings/Adj. tab ( ).
Note
If the Tab Selection screen is not displayed, press the Menu button.
4
Press the OK button.
The Set./Adj. Menu is displayed.
5
Press or to select Maintenance, and then press the OK button.
6
Press or to select Replace P.head, and then press the OK button.
7
Press or to select the Printhead for replacement.
Select Printhead L when replacing the left printhead, Printhead R when replacing the right printhead, and
L & R Printheads when replacing both. Make sure your selection is correct.
8
Press the OK button.
Ink begins being drawn in. When it finishes, instructions are displayed on the Display Screen.
It takes about three minutes for ink to be drawn into the system.
iPF9400S
Replacing the Printhead
Basic Guide
Consumables and Maintenance Printheads
35
Page view 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 153 154

Comments to this Manuals

No comments