Canon imagePROGRAF iPF9400 User Manual download pdf (Page 132)

Cause Corrective Action

Because the Platen is soiled with ink or other substances, the size of the clear film

cannot be detected.

Open the Top Cover and clean the entire

Platen.

(See "Cleaning Inside the Top Cover.")

→P.53

Insufficient paper for job

Cause Corrective Action

The printer has received a print job longer than the amount of roll paper left when ManageRe-

mainRoll in the Control Panel menu is On.

Press ▲ or ▼ to select Print, and then

press the OK button to resume printing.

When using the Media Take-up Unit,

press ▲ or ▼ to select Print, and then

press the OK button to resume printing.

However, the roll paper may run out

during the print job and you may not be

able to print all of the document.

Press ▲ or ▼ to select Change Paper,

and then press the OK button.

Change the Paper Source of the printer

driver, or replace the roll with a roll that

has enough paper for the print job, and

then printt.

When using the Media Take-up Unit,

press ▲ or ▼ to select Stop Printing,

and then press the OK button to stop

printing.

Remove the printed document from the

Media Take-up Unit, replace the roll

with a roll that has enough paper for the

print job, and then try printing again.

(See "Removing the Roll from the Print-

er.") →P.15

(See "Loading Rolls in the Printer.")

→P.11

(See "Removing Printed Documents

from the Media Take-up Unit (Optional).")

→User's Guide

Press ▲ or ▼ to select Stop Printing

or press the Stop button to stop print-

ing.

This paper cannot be used as size is not supported.

Cause Corrective Action

Paper that is too large for the printer has been loa-

ded.

Lift the Release Lever and load paper of the correct size.

(See "Paper Sizes.") →User's Guide

Paper that is too small for the printer has been loa-

ded.

Lift the Release Lever and load paper of the correct size.

(See "Paper Sizes.") →User's Guide

Paper has been loaded that is too small to print the

test pattern for printhead adjustment or nozzle

checking.

Lift the Release Lever and load unused paper A4/Letter (vertical) or larger. More

than one sheet may be required depending on the adjustment.

Roll printing is selected.

Cause Corrective Action

You have attempted to print on a roll, but no

roll is loaded.

Press ▲ or ▼ to select Load Roll Paper, and then press the OK button. Load the roll, and

then print.

(See "Attaching the Roll Holder to Rolls.") →P.9

Insufficient paper for job

iPF9400

Basic Guide

Error Message Messages regarding paper

132

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 153 154

Comments to this Manuals

No comments

Canon imagePROGRAF iPF9400 User Manual Page 132

Comments to this Manuals

Related products and manuals for Printers Canon imagePROGRAF iPF9400