Canon imagePROGRAF iPF9400S User Manual download pdf (Page 109)

The printer stops during a print job

An error message is shown on the Display Screen .................................................................................... 109

The printer ejects blank, unprinted paper .................................................................................................. 109

An error message is shown on the Display Screen

Cause Corrective Action

An error message is displayed during printing. Check the error message and take action as necessary.

(See "Error Messages.") →P.151

The last portion of roll paper was used during a print job, and paper

could not be advanced because the trailing edge is taped to the roll.

Remove the used roll and insert a new roll.

(See "Removing the Roll from the Printer.") →P.15

(See "Removing Rolls From the Roll Holder.") →User's Guide

(See "Loading and Printing on Rolls.") →User's Guide

The printer ejects blank, unprinted paper

Cause Corrective Action

The leading edge of the roll paper was

cut to straighten it.

The leading edge of rolls may be cut to straighten it if Trim Edge First is set to a value other

than Off in the Control Panel menu.

(See "Cutting the Leading Edge of Roll Paper Automatically.") →User's Guide

The Printhead nozzles are clogged. Print a test pattern to check the nozzles and make sure the Printhead is in good condition for

printing.

(See "Checking for Nozzle Clogging.") →User's Guide

A print job was received from an in-

compatible printer driver.

Use the correct imagePROGRAF printer driver for the printer and try printing again.

The printer is damaged. Contact your Canon dealer for assistance.

iPF9400S

An error message is shown on the Display Screen

Basic Guide

Troubleshooting The printer stops during a print job

109

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 153 154

No comments

Canon imagePROGRAF iPF9400S User Manual Page 109