Canon imageRUNNER LBP5360 User's Guide download pdf (Page 158)

4-53

2-sided Printing

Loading and Outputting Paper

2-sided Printing

You can perform 2-sided printing with the standard equipment of this printer. Plain

paper, heavy paper (28.0 lb Bond to 44.4 lb Cover (106 to 120 g/m

)), and coated

paper (27.9 lb Bond to 44.4 lb Cover (105 to 120 g/m

)) at sizes of A4, Legal, Letter,

and Foolscap can be used for automatic 2-sided printing.

IMPORTANT

•

You cannot perform automatic 2-sided printing on heavy paper (44.5 to 81.4 lb Cover

(121 to 220 g/m

)), transparencies, labels, coated paper (44.5 to 59.2 lb Cover (121 to

160 g/m

)), and envelopes.

•

When 2-sided printing is speciﬁed, and a job with odd number of pages is printed, the

printing surface of the last page are as follows according to the setting for ALT.METHOD

(See p. 6-34) or the paper source.

- When printing from the paper cassette

If ALT.METHOD is set to ON, the printer prints on the upper side of the loaded paper.

If ALT.METHOD is set to OFF, the printer prints on the underside of the loaded paper.

- When printing from the multi-purpose tray

If ALT.METHOD is set to ON, the printer prints on the underside of the loaded paper.

If ALT.METHOD is set to OFF, the printer prints on the upper side of the loaded paper.

•

Set ALT.METHOD to OFF when you want to match the setting of the orientation or

printing side for the last page with those for its previous page, such as when you want to

print previously printed paper etc. whose printing orientation or printing side is ﬁxed.

•

During automatic 2-sided printing, do not touch the paper until it is output to the output

tray completely. In automatic 2-sided printing, the paper is partially output once after

printed on its surface and is fed again to be printed on its reverse side.

•

When performing manual 2-sided printing, ﬂatten curls of the paper, and then load one

sheet at a time in the multi-purpose tray.

NOTE

Depending on the capacity of the RAM in the printer, the print quality may deteriorate, or

the printer may not be able to print, displaying <39 SPL MEM.FULL> when performing

automatic 2-sided printing on documents that make heavy use of lines or contain

complicated diagrams, charts, or graphs. In this case, you need to print again with

GRADATION LEVEL (See p. 6-35) set to HIGH 1 or install an optional expansion RAM

module (See p. 1-14).

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 443 444

Comments to this Manuals

No comments

Canon imageRUNNER LBP5360 User's Guide Page 158

Comments to this Manuals

Related products and manuals for Laser/LED printers Canon imageRUNNER LBP5360