Canon imageRUNNER LBP5360 User's Guide download pdf (Page 227)

6-44

Printing Environment Settings

SETUP Menu Settings

QUALITY CHANGE

CONT.PRINTING*, STOP PRINTING

Speciﬁes whether the printer should continue printing with the image quality of the

data being lowered automatically or stop printing displaying the following error

message when the memory required for the process runs out.

If CONT.PRINTING is speciﬁed, the printer prints with the image quality of the

data being lowered automatically without displaying a message.

If STOP PRINTING is speciﬁed, the printer stops printing, displaying a message.

In this case, the printer resumes printing with the image quality of the data being

lowered by pressing [Online].

NOTE

•

When the message <38 LOW IMGE QLTY> appears frequently by specifying

STOP PRINTING for this item, perform the following procedure.

If GRADATION LEVEL is set to HIGH 2, set it to HIGH 1. If you do so,

however, the printer prints with the gradation level of the data being lowered.

2. When the message still appears after applying the Remedy 1, or when you

want to print with the gradation level of the data as it is, install an optional

expansion memory module (RAM).

•

If STOP PRINTING is speciﬁed for this option, the printer sometimes stops printing,

displaying the message <26 SYS.MEM.FULL> depending on the type of the

received data when the memory required for the process runs out. In this case, you

can clear the error by pressing [Online]. However, the data may not be printed

properly.

Error Message Setting

<38 LOW IMGE QLTY>

When the printer receives a large amount of data or

complicated data, the memory required for the

process may run out, and the printer may print with its

resolution level being lowered automatically. Specify

whether the printer should display an error message

when the printer is in this status.

1 2 ... 222 223 224 225 226 227 228 229 230 231 232 ... 443 444

No comments

Canon imageRUNNER LBP5360 User's Guide Page 227