Canon imageRUNNER LBP5360 User's Guide download pdf (Page 358)

8-61

Troubleshooting

When You Cannot Obtain Appropriate Printout Results

The colors of thin lines or ﬁlled-in patterns are different from the speciﬁed colors, or do not

appear at all.

Cause 1 Some colors cannot be reproduced due to the combination of colors or

patterns.

Remedy 1 Adjust the colors in the application and print again.

Remedy 2 Change the patterns in the application and print again.

Cause 2 The color may appear different depending on the ﬁll-pattern.

Remedy 1 Readjust to a darker color and print again.

Remedy 2 Reload paper to change the feeding direction, then print again.

Fill-patterns are not printed in the correct color (speciﬁed color).

Cause The ﬁll-pattern of the print data and the dither pattern of the printer are

interfering with one another.

Remedy 1 Print again without specifying a ﬁll-pattern in the application.

Remedy 2 Set [Color Halftones], [B & W Halftones], or [Halftones] to [Gradation] or [Color

Tone] in the printer driver.

In order to specify the setting for [Color Halftones], [B & W Halftones], or

[Halftones], display the [Detailed Settings] dialog box by clicking [Details] in the

[Quality] sheet.

Remedy 3 If you are using UFR II Printer Driver, set [Graphics Mode] to [Raster Mode],

[Rendering Rate] to [24 BPP], and [Gradation] to [Standard] to set [Color

Halftones] or [B & W Halftones] to [Error Diffusion].

In order to specify the setting for [Graphics Mode], [Rendering Rate],

[Gradation], [Color Halftones], or [B & W Halftones], display the [Detailed

Settings] dialog box by clicking [Details] in the [Quality] sheet.

The displayed color and printed color differ when printing photos, etc.

Cause The method for adjusting color on the screen (RGB) and in the printer (YMC) is

different. Therefore, there may be cases when the color on the screen cannot

be printed out exactly as it appears.

Remedy 1 Set [Matching Method] to [Perceptual [Monitor Color Matched]] in the printer

driver.

In order to specify the setting for [Matching Method], display the [Matching]

sheet by selecting the [Manual Color Settings] check box in the [Quality] sheet,

and then clicking [Color Settings].

1 2 ... 353 354 355 356 357 358 359 360 361 362 363 ... 443 444

No comments

Canon imageRUNNER LBP5360 User's Guide Page 358